FUSE BOX RELOCATION
first off I made a sheetmetal box to fit the fusebox.
with a cover 
It'll be sitting right down here under the headlight
Made a rough cardboard template for the mounting piece, transfered it to sheertmetal and bent it up.
There's some factory holes under here for mounting. And the two tabs line up with some body mounting bolts.
So I secured my box to the sheetmetal mount with some pop rivots, and rerouted the wiring.
The only thing left to do is shoot it with some flat black paint to help it disappear in the bumper
So there you go, just thought I'd share. I haven't seen anything like
this here on the boards so hopefully this will atleast help the next
guy who is looking to do this.
- Thanks to NinetyFiveNA for this write up
