only search this site

Door Card Removal Guide  (diagram)

Tools Required

  • Philips Screwdriver
Step 1
  • Remove the 3 fasteners. There are 2 screws (with caps on) and a black plastic trim fastener
Step 2
  • Remove the 4 screws on the lower edge of the door
Step 3
  • Remove the door release handle trim screw
Step 4
  • Remove the 2 black plastic fasteners.
Step 5
  • Remove the screw - I have seen some cars where this screw has not been fitted, so don't be worried if its not there!
Step 6
  • Remove the single black plastic fastener, located in the lower edge of the door card
Step 7
  • Remove the screw located in the door grab handle - sometimes these screws will have a cap on.


Step 8
  • Unclip the connector from the unit


If you break any of the clips you can get great prices on new ones from:

Royal Moore Toyota  they are great at giving the best online prices - Contact Ken Blake at

-Thanks to Si Murphy

Make a Free Website with Yola.